Website AL-KO AL-KO is a part of the biggest axis factory in the world, the American Dexter Axle. The original German company, founded in 1931 by Alois Kober, specialises in the manufacture of chassis for trailers. AL-KO is market leader for this product. The Mammut mover is developed by AL-KO itself.
AL-KO AMS Mammut
The Mammut mover is optimally suited for mounting under caravans from 2010 that are fitted with an M stamped into the chassis. There is no loss of ground clearance, which can be a big advantage for lots of caravans. A fitted Mammut M-20 only weighs 32 kg. The difference in weight becomes clear when we look at the AL-KO Vario chassis with M, where a mounting plate of 5 kg is needed to fit other movers. You need to add this to the weight of the mover.
Here at CaravanMoverShop our expert knowledge means that we recommend the AL-KO Mammut mover for caravans with less ground clearance and with the new M embossed Vario chassis. Other caravan mover models cause a loss of ground clearance of 5-6 cm (Reich/Truma) up to 9 cm (Go2 and other brands) for caravans with the Vario chassis. By comparison, the AL-KO Mammut mover's ideal suitability for caravans with the Vario M chassis means that this degree of loss of ground clearance, along with the problems associated with having little ground clearance, is avoided.
AL-KO Mammut
Control
Before you can operate the mover, you need to activate it. This is done by holding the remote control in front of the sensor. After you have done this, you can push the button that will bring the mover in position to the tires. The joystick will allow you to maneuver the caravan easily and comfortably.
Integrated (M20) or Under Chassis Fitting (S2x)
There are two Mammut models. The lower variant (model S) is to be used on chassis that do not have the punched M. You will lose around 6 cm ground clearance. The other, higher installation type M, does not lose ground clearance because it is mounted directly on the chassis beams. The engines of these models are the same, but the lower variant is 10 kg heavier. This can be converted to the higher variant for future-use.
The embossed M has been included on chassis since 2010. As previously stated, it is possible to fit the integrated version of the AL-KO Mammut mover with the advantage of no loss of ground clearance. The mover is fitted left and right with a crossbar across the chassis. Please be aware that fitting the mover is more complicated than it might first seem – if you are fitting the mover yourself make sure you read the instruction manual thoroughly and allow sufficient time to fit the mover.
Benefits of the AL-KO Mammut
The greatest advantage of the AL-KO Mammut mover is no loss of ground clearance. What also makes this mover special is the difference in its appearance. The AL-KO Mammut mover is completely encased in aluminum. It looks great and is also completely protected against water, dust, dirt and so on, with an IP65 rating. As the AL-KO Mammut mover is completely encased, you are free to clean it with water without fear of causing any damage.
Remote Control Joystick Operation
After connecting the remote control via the magnetic switch, command the mover to go to the tires.
After this you can operate the mover with the remote control joystick, providing you with precise, variable speed control and seamless direction control.
The AL-KO Mammut mover delivers controlled and smooth start and stop functions when maneuvering your caravan. Other impressive functions include the ability to maneuver your caravan through a 360 degree turn and also to hold your caravan steady on slopes of up to 28%. The maximum speed of the AL-KO Mammut mover is 0.5 km/h (14 cm/s).
AL-KO Mammut magnetic switch
Don’t save on the battery and charger!
After you have chosen the right mover, the next step will be the selection of a battery and charger. Generally a mover provides more power than a small car. All necessary energy is supplied by the battery. If the mover doesn’t get enough energy, sufficient power will be unavailable. There will be more wear and the lifespan of the mover will be shorter. We only sell batteries that we have tested and we are conservative and careful in our advice. In association with ACSI Freelife magazine we’ve tested different batteries with different techniques. The Optima Yellow Top AGM batteries performed well on a track of 90 meters with a gradient of 6%. The Reich MPP achieved the same. All other standard wet, calcium and cheap AGM batteries didn’t reach this distance. This despite the fact that the manufacturer stated that the batteries could deliver 70, 90 or even 110 Ah. Of course we were also interested in the long-term performance of the Optima Yellow Top 55Ah battery. Hence, we tested a 7 years old Optima battery. It drove the distance without any difficulty. So the difference in performance cannot be explained by the capacity of the battery but in the maximum delivery of energy. Most batteries cannot deliver the energy that is needed. We deliberate choose only a few battery brands and types.
Lithium maximum weight saving!
We sell three types of lithium batteries. Manufacturer Reich has the most experience with the MPP, and you will obtain maximum weight saving. Manufacturer PowerXtreme has the best prices. With the X10 you will obtain maximum weight saving. And with the PowerXtreme X30 you save weight and you can use it for a board network connection because it has more capacity.
AL-KO Ranger S21
The AL-KO Ranger S21 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (433 mhz) with push buttons. You can make the caravan turn around the axis.
Technic
This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 1500 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1200 kg. The actual weight of the mover itself (measured by us) without battery is approximately 42,00 kg.
The height for the installation is 18,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 38,00 cm. The drive motor has 2 Motor brushes. The mover was introduced in 2016.
AL-KO Mammut AMS2 S21
The AL-KO Mammut AMS2 S21 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick. You can make the caravan turn around the axis.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 2200 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1800 kg. The actual weight of the mover itself (measured by us) without battery is approximately 40,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 6,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
AL-KO Mammut AMS2 S22
The AL-KO Mammut AMS2 S22 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick. You can make the caravan turn around the axis.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 2200 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1800 kg. The actual weight of the mover itself (measured by us) without battery is approximately 40,00 kg.
The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 9,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
AL-KO Mammut AMS2 M20
installation dimensions
The AL-KO Mammut AMS2 M20 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick. You can make the caravan turn around the axis.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 2200 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1800 kg. The actual weight of the mover itself (measured by us) without battery is approximately 32,00 kg. The mover is relatively low in weight.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
Video AL-KO Mammut AMS2 M20
AL-KO 4WD Ranger TS411
The AL-KO 4WD Ranger TS411 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (433 mhz) with push buttons.
Technic
This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 1800 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2200 kg. The actual weight of the mover itself (measured by us) without battery is approximately 84,00 kg.
The height for the installation is 18,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 38,00 cm. The drive motor has 2 Motor brushes. The mover was introduced in 2016.
AL-KO 4WD Mammut AMS2 TM400
installation dimensions
The AL-KO 4WD Mammut AMS2 TM400 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 67,00 kg. The mover is relatively low in weight.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TS421
installation dimensions
The AL-KO 4WD Mammut AMS2 TS421 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 84,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TM420
installation dimensions
The AL-KO 4WD Mammut AMS2 TM420 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 77,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TM402
installation dimensions
The AL-KO 4WD Mammut AMS2 TM402 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 74,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TM401
installation dimensions
The AL-KO 4WD Mammut AMS2 TM401 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 74,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TS411
installation dimensions
The AL-KO 4WD Mammut AMS2 TS411 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 84,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TS412
installation dimensions
The AL-KO 4WD Mammut AMS2 TS412 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 84,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO 4WD Mammut AMS2 TS422
installation dimensions
The AL-KO 4WD Mammut AMS2 TS422 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 84,00 kg.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 7,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
installation dimensions
AL-KO
Spare parts
If you have damage, or if there are problems after the warranty period, the brands PowrMover, Reich, Truma, and AL-KO offer an almost complete range of spare parts. So, if you have a small problem after the warranty period, you don't have to buy a whole new mover. You can often solve the problem with a separately ordered spare part. The spare parts of most movers are guaranteed available for 10 years. In addition, we have the most extensive range spare parts used and new in stock.
Warranty AL-KO
The name of our company CaravanMoverShop clearly indicates what we do, we sell and install caravan movers. Movers of brands like Truma, Reich, and AL-KO. Furthermore we sell high quality batteries and battery chargers. At first, the purchasing price of these products seems higher, but this reflects the high quality of the parts and materials used. Advantages you benefit from as these products are less prone to break down and last longer. The fitting of a mover underneath a caravan requires skillful craftsmanship. That's where CaravanMoverShop makes the difference. A well-fitted mover improves a flawless operation and maximum longevity. Which mover you choose depends on the type of caravan, the layout of the mover and specifications, like ease of use. We will be happy to give you our professional advice based on our experience and we offer the best after-sale service and support.